Vapefly BRUNHILDE MTL 23mm RTA

Discover the Vapefly BRUNHILDE MTL RTA, featuring a single coil configuration, and interchangeable deck airflows, and stainless steel wicking braids. Constructed from impact-resistant stainless steel, the tank of the BRUNHILDE MTL RTA can survive light falls and drops while holding up to 5mL of eJuice. Featuring a side fill system, the Vapefly BRUNHILDE MTL RTA encases a dual post build deck with two open terminals per post to make coil installion a breeze. At the center of the build deck is a threaded airflow control, allowing users to control and switch out bigger or smaller airflow options. Braided stainless steel wire wicks control the delivery of eJuice and allow bottom to top wicking via capilliary action.

Vapefly BRUNHILDE MTL 23mm RTA Features:
23mm Diameter
5mL Capacity
Pyrex Glass Reinforcement
Side Fill System – 3.2mm Port
Superior Stainless Steel Tank Construction
Dual Post Build Deck – 2 Terminals Per Post
Top Secured via Hex Screws
Single Coil Configuration
PEEK Insulator
Threaded Interchangeable Airflows – 6 Options
0.9mm, 1.2mm, 1.4mm, 1.8mm, 2.1mm, 2.5mm
Two Braided Stainless Steel Wicking Wires
Threaded 510 Connection
510 MTL Drip Tip
Available in SS, Black, and Gunmetal

Includes:
1 BRUNHILDE MTL RTA
2 Braided Stainless Steel Wire
1 Replacement Glass
1 O-Ring Set
1 User Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.