Kanger DRIP-EZ 80W Pump Squonker Kit

The Kanger DRIPEZ 80W Starter Kit showcases a unique design in vaping technology, featuring an industrialized pump system that offers an unprecedented dripping experience alongside a powerful chipset with firmware upgrades. Built from the ground up with an emphasis on creating the most ergonomic dripping experiences to date, the DRIPEZ includes a compartment that houses a 15mL or 16mL bottle with the convenient pump system directly above the chassis. The innovative “squonk-ready” configuration delivers fluid directly into the tank through clear tubes, activated by a simple user-applied pressure pump. This function allows users to effectively feed fluid into the deck as needed, with a large reservoir for all-day usability. The DRIPEZ RBA features an innovative screwless, two-post design with a clamp mechanism that facilitates easy build configurations, enhancing the overall building experience. The DRIPEZ Mod integrates Kanger’s new chipset with customization and firmware upgrade capabilities, featuring a maximum output of 100W (with firmware upgrade) and a full temperature control suite with onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. It is powered by a single high-amp battery (sold separately) loaded from a locking battery door located on the side of the device, opposite the oversized firing mechanism. With one of the most innovative yet user-friendly designs to date, the Kanger DRIPEZ 80W TC Starter Kit represents cutting-edge output technology with an unprecedented form factor.

Kanger DRIP EZ 80W TC Starter Kit Features:

• Houses 15mL or 16mL Bottle
• Single High-Amp 18650 Battery – Not Included
• Maximum Wattage Output: 80W (100W with Upgrade)
• Minimum Atomizer Resistance: 0.1ohm
• Temperature Control Range: 200-600F
• All-In-One Design – Rebuildable Squonker-Style Pump Platform
• Unique Fluid Pump System – User-Applied Pressure
• Direct-to-Tank Fluid Design
• Versatile Temperature Control Module
• DRIPEZ RBA
• Two-Post Screwless, Threaded Design – Clamp-Style
• Single Build Configuration
• 510 Connection

To utilize the temperature control feature, it requires the use of nickel or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This poses a risk of battery explosion! Please ensure that the devices/mods you are using are capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only works on mechanical mods or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please ensure you have a thorough understanding and technical knowledge of how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connections on any hybrid or hybrid-style device. If you are not familiar or unsure about particular products or setups, please do not use them. Always exercise proper precautions and handling.

Note: When using RDA, RDTA, and RDTA, we strongly recommend washing and cleaning all the atomizers thoroughly and carefully. Likewise, please have a strong understanding when it comes to handling and using these products.

We always strongly recommend testing the coils with an ohm-meter before using them with your mods, devices, and batteries. Coils with low resistance are not suitable for all mods, devices, and batteries. Please ensure that your mods, devices, and batteries can handle low resistance before using them.

This product is for advanced users only! Please have a thorough understanding and technical knowledge of how to use this product to use it properly. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage resulting from any modification of the batteries, chargers, devices, and other products that we carry in any form or shape, including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary, that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable cells, please be cautious and use them carefully as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please ensure that you have a strong knowledge of all rechargeable batteries before using them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you notice any visible damage on the batteries, please do not use them. Always keep, store, and transport rechargeable cells in a safe, non-conductive container in a controlled environment.

Do not use any rechargeable battery or charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers, or any other electronic devices in accordance with local laws and mandates.